24/7 ONLINE MONITORING SOLUTIONS

SENSOR DDS® RMS

The SENSOR DDS® RMS is system developed by Sensor s.r.o. where regular/irregular grid of sensors is installed permanently into the ground below the geomembrane.

This system is installed in conjunction with SENSOR DDS® LMS giving the opportunity to have even more control over the integrity of the geomembrane.

SENSOR DDS® RMS is online system which means that Sensor technicians don’t have to travel on site to perform the test, this system enables us to connect and acquire the measuring data remotely from our base office via Sensor Cloud.

System is equipped with alarm with online connectivity as a standard. In event of a leak, system will trigger visual and audio alarm as well as provide immediately automatic SMS message and Email to notify the client of the problem.

Acquired data are then processed and analysed in Sensor office for precise location of the leak which is then reported back to the client within 48 hours.  

 

The benefits of SENSOR DDS® RMS:

Very important benefit of this system is saving client’s money and precious time when problem occurs as Sensor technician doesn’t have to attend site and is in full control of SENSOR DDS® RMS equipment remotely from our base office.  

Other benefits:

  • Live alerts by SMS & Email, to any person specified by you
  • Rapid resolution of leaks.
  • Security against tampering by vandals/terrorists
  • Immediate discovery of liner damage
  • GPRS / 3G / Broadband connectivity
  • Proactive rather than reactive
  • Permanent confidence that the liner is not leaking
  • Extends life of any installed liner

 

 

 

 

 

 

 


SENSOR DDS® CMS

SENSOR DDS® CMS is the most sophisticated version of Sensor's online systems. It was developed with focus on  24/7 fully automatic geomembrane monitoring with precise damage detection and location functions, all without intervention from the client, or Sensor. This fully automatic approach enables the client to be completely independent from the system supplier.

SENSOR DDS® CMS consists of two main parts: the robust field components, which can be exposed to local environmental conditions such as extreme weather and hazardous chemicals; and the control panel, which can be located within a site building, or in a special kiosk.

On very large sites, a network installation approach can be adopted, consisting of a master control panel along with a series of local slave panels at different locations around the facility. Sensor CMS systems can be connected as a group to the 'Sensor Cloud' where they can be monitored remotely from one control centre. 

 

The benefits of SENSOR DDS® CMS:

Very important benefit of this system is saving client’s money and precious time when problem occurs as Sensor technician doesn’t have to attend site and SENSOR DDS® CMS  will analyse anomalies and report leaks to the client automaticaly.  

Other benefits

  • Live alerts by SMS & Email, to any person specified by you
  • 24/7 control
  • Rapid resolution of leaks.
  • Security against tampering by vandals/terrorists
  • Immediate discovery of liner damage
  • GPRS / 3G / Broadband connectivity
  • Proactive rather than reactive
  • Permanent confidence that the liner is not leaking
  • Extends life of any installed liner

 

 


SENSOR DDS® LAM

SENSOR DDS® LAM is the entry level alarm system for installation in conjunction with a FIXED system. Utilising tried and tested industrial technology it is a robust and effective solution brought to you at a low relative cost.

LAM panels can be sited inside or outside and can be supplied with UPS battery backup to prevent down time in the event of power failures and in addition can be supplied with solar panel power supplies in case the site has no available electricity supply.

In the event of a leak occurring after initial installation the panel will enter an alarm state, providing an audible tone of differing intensity depending on client requirements. Furthermore a visible LED light will warn of a problem and for the ultimate in notification a 3g module can be incorporated that can send email and sms text messages to those responsible for managing the site.

SENSOR DDS® LAM cannot position damage only warn that damage has occurred. Once an alarm has been received the site needs to be tested using the LMS system to locate the damage responsible for the alert.

Advantages of our Leak Alarm Module:

  • Low relative cost of entry to a 24/7 monitored solution
  • Immediate notification of damage occurring
  • Minimisation of leakage volume
  • Eliminates need for regular manual testing